HOW TO INSTALL A GRAPHIC KIT
Important: Follow These Instructions Carefully. We are not responsible for incorrectly installed decals.
1. Clean the Surface Thoroughly
Use a grease and dirt remover to clean the target surface (fairings). This ensures proper adhesion of the decal.
2. Position the Decal
Place the decal on the surface with the backing paper still attached. This helps you align it accurately before application.
3. Start Installation from a Corner
Peel off the backing paper gradually.
Tip: Use a high-quality decal squeegee during application to ensure the decal lays flat without air bubbles.
Work slowly and ensure the decal remains aligned.
We recommend using our application kit, which includes an ergonomic squeegee and a sharp knife. This helps you achieve a professional result!
4. Finish with Heat
After applying the decal, gently heat it with a hairdryer on a low setting. This step ensures better adhesion but avoid overheating the surface, especially with Fullchrome and Fullholo decals, as excessive heat may damage these specialty materials.
Press the decal firmly over all areas for a durable finish.
5. Trim if Necessary
If any part of the decal extends beyond the fairing, carefully trim the excess with a decal knife. This prevents dirt from getting under the decal and ensures a clean look.
